Receiver Block Diagram etc. (4c1, 4d1 & 4d2)

 

 

Item

Name

Description

1

Tuning and rf amplifier

·          Tuning selects just the signal we want to hear from all the many different radio signals being transmitted on different radio frequencies.

·          Tuning uses tuned circuits consisting of inductors (coils of wire) and capacitors.

·          The rf amplifier increases the signal received from the air by the antenna.

·          Antenna are connected to receivers by special wires known as feeders.

2

Detection

·          Detection is the process of recovering the original modulating signal. 

·          The process is sometimes known as de-modulation (reverse of modulation in the transmitter).

3

Audio Amplifier

·          The audio amplifier increases the detected audio signal to level that can be used with a loudspeaker.

4

Loudspeaker

·          Sometimes headphones are used in place of the loudspeaker.  

 

You should already recognise the symbol for the antenna or aerial on the left and the loudspeaker on right.  If not click hear to remind yourself of circuit diagram symbols. 

 

Return to Index